As the really hot weather moves on and the nicer temperatures move into the Phoenix area, more people than ever before are breaking out the bicycles for transportation, pleasure and of course exercise. Cyclists have become a part of our landscape and most communities have made efforts to protect their rights on the road. Unfortunately, this time of year is also the peak season for Phoenix bicycle accidents. Cyclists must be vigilant for situations that could produce accidents - and know what to do if they are injured in one!

Be Aware of the Likely Scenarios While bicycle accidents are dropping nationwide, getting into one can be a horrific experience. Unlike being surrounded by the shield and safety technology of a car, there is nothing between you, the cyclist, and several tons of oncoming steel. Even at low speeds, an accident can produce serious and expensive injuries. Understanding the most common accident producing situations is one way to be safe on the road. For example, according to several U.S. Department of Transportation funded studies, most accidents occur on a Friday or Saturday, with the peak time for accidents falling between 3:00 - 9:00 p.m. These same studies found that over a third of accidents happen at an intersection, with over half of all accidents occurring on a major road. When accidents do happen, studies show it is usually because the motorist has failed to yield to the cyclist, misjudged the distance required to pass the cyclist or otherwise merged into the cyclist https://www.tzgerui.com/product/electric-scooter/electric-balancer-car-m3-2.html path.

These accidents can cause serious and sometimes irreparable injury to a cyclist. Proper Preparation Reduces the Risk Taking proper precautions is another obvious way of controlling your risk of an accident. Nearly all cyclists who were killed in accidents, for example, were not wearing a helmet. Make yourself as visible as possible by wearing bright or reflective clothing. Use lights at night. Remember, a bicycle is much more difficult to see than a car. In the same vein, do not perform unexpected maneuvers in traffic, if possible. Do not pass cars on the right side, as they may not be expecting it, and do not ride against traffic. Follow the lane markings and traffic signals. Be aware of your surroundings at all times. Maintain your bike so that you can stop quickly if needed, scan the road behind you frequently and try to make eye contact with drivers. What if I have been in an Accident? Sometimes even the best of preparations cannot prepare us for a bad motorist. When these accidents happen, a cyclist may suffer head trauma, spinal cord injuries, broken bones or other painful and extended injuries. This is the time when the services of a quality Arizona bicycle attorney can make the difference in your quality of life.

Wade &Nysather is the leading automobile, bicycle accident and wrongful death law firm in the Valley, with convenient offices # located in Scottsdale, Glendale and Sun City, Arizona, servicing those communities, as well as Phoenix, Cave Creek, Carefree, Mesa, Gilbert, Buckeye, Chandler and Litchfield Park, Arizona. Because we have purposefully chosen to remain small, we are able to focus individual attention on your case. For over 20 years we have been working hard to get our clients the fair compensation they need and deserve to move on past the trauma of an accident

We generally need to pay attention to the following issues when inflating electric bicycle tires. The following electric bicycle manufacturers will introduce them in detail.

In addition to the battery, the driving power of an electric car has its tires. The tires provide the most basic guarantee for its driving. If the tires have problems, the electric car will not be able to drive. Therefore, when inflating the tires of an electric vehicle, you must pay attention to your sense of measure.

　　If the tire pressure of the electric vehicle tire is too low, it will cause excessive sidewall flexion, causing the tire to overheat, causing the carcass to relax, the strength is reduced, degumming or even damage. At the same time, the tire contact area is enlarged and the wear of the shoulder part is accelerated. If one of the twin tires is out of air, most of the load of the vehicle will be concentrated on the other tire during driving, causing severe overload. If the tire pressure is too high, the tire cord will be overstretched, and in severe cases, it will break. And it will reduce the tire’s ground contact area and increase the load per unit area of ​​the tire, resulting in faster wear of the crown part and easy crown blasting.

Properly inflate the tires of electric vehicles, so that the driving can reach the ideal level, and at the same time can extend the life of the tires. Excessive or insufficient inflation will not only threaten safety, but will also cause uneven wear and tear, making your driving more unstable and more likely to be damaged by overheating. Insufficient inflation will speed up battery power consumption. Therefore, the user should check the air pressure with a barometer at least once a month, and check the pressure inside the tire when the tire is cold.

https://www.tzgerui.com/

Electric vehicles are our main means of transportation. We often use electric vehicles. There will be a lot of dust and dirt on electric vehicles. How should we clean and maintain electric vehicles? Today, I will share a few methods for electric bicycles, and I hope it will be helpful to everyone.

1. When our electric vehicles get dusty, we should scrub them frequently. When we scrub the electric vehicles, don’t pour water on the electric vehicles, because there are many circuits in the electric vehicles. If the circuits are wetted , Will affect the use of electric vehicles. It may damage the electric vehicle.

2. When we are cleaning electric vehicles, we need to use a rag to half dry and then slowly scrub the electric vehicles. We can first wrung out with a wet rag and then wipe the whole body of the electric vehicle to one side. Change a few more pots in the dirty place Water, scrub slowly and patiently.

3. When cleaning the electric vehicle, we must pay special attention not to wet the electric circuit of the electric vehicle. As long as there is a circuit, it is best not to get water. We also need to clean the wheels, because if the metal ring of the tire is dusty. It is easy to rust after growing, especially after it rains, the metal is covered with a thick layer of soil, which is not conducive to the evaporation of water. We’d better clean the dirt on it to avoid rust.

4. Especially in the lower part of the electric vehicle, there is a lot of dust and mud. We need to use a rag to slowly soften the clumped mud and dust, and then remove the mud and dust. Be careful not to damage the parts of the electric vehicle. Use a sharp tool to poke and scrape the dust on the electric vehicle, and slowly wipe it with a rag with water.

The above are the tips for cleaning and maintaining electric vehicles. You can learn more about it, and hope it can help you.

https://www.tzgerui.com/

Four hazards of two-wheeled electric car sunshades

Installing awnings for two-wheeled electric vehicles seems to be popular now, and such awnings can be seen everywhere on the street. It protects us from wind and rain, and is popular with two-wheeled electric car owners, but it is also harmful. Four major hazards of installing sunshades on electric vehicles:

One is the expansion of the car body area, which increases the incidence of collision accidents;

Second, the driver’s viewing angle is restricted, which expands the blind spot;

Third, it affects the turning flexibility of electric vehicles, which is not conducive for drivers to quickly avoid danger;

Fourth, when a traffic accident occurs, the space for drivers to escape from danger is restricted and the probability of injury or death is increased.

Although the two-wheeled electric car awning brings benefits to our lives, it also threatens our safety. For the health of yourself and your family, Linyi Jinkuo electric vehicles remind everyone to pay attention to safe driving.

1. Get a Doctor’s Prescription

When mobility becomes limited, most physicians will write a prescription for an electric powered scooter. (Whether private or Medicare, a prescription is required when filing for insurance. ) Once that has been done, the next step is to consult with an equipment specialist who is familiar with the home medical equipment business before you purchase a scooter.

2. Custom Fitting

A scooter can be custom designed to meet individual needs and requirements. The customization begins with important measurements including the patient’s height, weight and arm length. Daily habits and use of the equipment are also important factors that need to be taken into account when choosing a scooter.

Other options such as full body support and type of speed control will be taken into account as well. Both comfort and utilization requirements need to be considered when customizing scooters for individual users. On most mobility scooters you can choose:

• seat covering
• extra padding
• lumbar supports
• powered height adjustments
• armrests can also be added, removed or changed.

3. Mobility Scooter Models

Battery powered mobility scooters come in a variety of models including those resembling chairs and those with handlebars for steering. Scooters are categorized in several ways:

• Number of wheels (3 or 4)
• Weight Capacity (250 lbs. is standard, but some go as high as 350 lbs.)
• Turning radius
• Speed
• Degree of incline the scooter can handle
• Battery life
• Weight of Scooter
• Ease of transport

There is the option of a scooter suitable for combined indoor and outdoor use, or a special outdoor model with rear-wheel drive for rugged terrain. These scooters are covered under the A.D.A accessibility laws which means you can use your powered scooter inside public places such as stores, theaters, museums and on public transportation. Also, powered scooters for outdoor use usually have extra safety features, such as lights, horns and turn indicators. Other extra accessories may include portable battery chargers, baskets, oxygen carriers, sun shades and storage compartments.

Scooters range in price from less than $600 to more than $3200, depending on the above factors.

4. Take the Scooter for a Test Drive

Just like a car, it is important to test drive a scooter. This allows an individual to get a feel for driving around in a scooter and it provides the supplier with valuable information as to the buyer’s needs. How a person maneuvers and handles a scooter impacts additional considerations such as controls for how fast the scooter can go and a seat belt to help with body support.

5. Home Accessibility

Another important factor to consider when purchasing a mobility scooter is home accessibility. Consider these factors for the greatest freedom in using the motorized scooter in a home.

• Is there ramp access from the vehicle to the home?
• Is the scooter going to be used in a home, and if so, is there handicapped access?
• Is there enough space in the home for a powered scooter to safely turn around and get through doorways?
• Will the scooter need to be used in the bathroom?
• Can a transfer be safely made from the scooter to the toilet?

6. Transporting the Mobility Scooter

Depending on the type of mobility scooter you purchase, a car or van will need to be modified in some manner to transport the scooter. If you purchase a travel scooter, they are compact and easy to fold and designed to fit in the trunk of a car. For all other scooters, a lift or carrier will need to be added to the vehicle.

For vans, a lift can be installed to transfer the scooter from the ground into the van. A second and less complicated option is to install a lift or carrier which mounts to the back bumper of a car or van. Take into account who will be moving the scooter and their abilities before you make a decision.

The Department of Veteran Affairs provides these basic guidelines to help with making decisions about how best to transport the scooter.

Typically a person transporting the scooter needs to be able to:

• Lift up to 50 pounds
• Kneel or work at ground level
• Lift objects 2 to 3 feet off the ground
• Lift objects into/out of the back seat of a car
• Lift objects into/out of a car trunk (Note: This requires lifting the scooter over the trunk edge and down 4 to 6 inches into the trunk.)

Before making the important decision to purchase a mobility scooter, talk about all of the options with an equipment expert, assess the environment and find the best fit to give the disabled individual more independence so they can enjoy life.